18-10-21 1 Odsłon

Hydraulic Press

    What is a Hydraulic Press?

    A hydraulic press is a mechanical device that uses the static pressure of a liquid, as defined by Pascal‘s principle, to

shape, deform, and configure various types of metals, plastics, rubber, and wood. The mechanism of a hydraulic press consists

of a mainframe, power system, and controls.


    Pascal‘s principle states that when pressure is applied to a confined liquid, a pressure change occurs in the liquid.

For a hydraulic press, the pressure in a liquid is applied by a piston that works like a pump to create mechanical force.


    Chapter Two: How a Hydraulic Press Machine


    The process of a hydraulic press begins when a hydraulic fluid is forced into a double acting piston. The compressive

force inside the small hydraulic cylinder pushes the fluid into a larger cylinder where more force and pressure are applied.

The movement of the larger piston forces the fluid back into the smaller piston cylinder.


    The passage of the fluids between the two pistons creates increased pressure that produces mechanical force to drive the

anvil on a hydraulic press downward onto a workpiece that is deformed to produce a desired shape. Once the movement is

complete, the pressure is released and the anvil returns to its original position.


    How a Hydraulic Press Works

    The components of a hydraulic press include two cylinders, two pipes, and two pistons. One of the cylinders is the ram

and the other is the plunger; they are connected by a chamber that is filled with hydraulic fluid.



    In many hydraulic systems, several rams are used, the number of which depends on the working load. Multiple small rams

are preferred over a single larger one to allow for better control over the thrust force. Fluid is supplied to the ram by a

pump and hydraulic accumulator that works between the rams and the pump.



    The accumulator stores hydraulic pressure as a fluid, which is released when required. The configuration of a hydraulic

accumulator is a cylinder with a piston that is spring loaded or pneumatically pressurized. The pump continuously pumps

hydraulic fluid into the accumulator to keep the pressure in it constant. The inlet of the accumulator is attached to the

pump, while the outlet is attached to the machine.


    Without the accumulator, the pump would have to be continually running. The accumulator helps avoid this by serving as a

storage container for the energy needed to operate the machine.



    The three types of hydraulic pumps are vane, gear, and piston with piston pumps being the most commonly used. The pumps

for a hydraulic press are a positive displacement pump, which means they deliver a constant amount of fluid with each pumping

cycle. The positive displacement pump can be fixed or variable with a fixed pump working at a constant speed while a variable

pump changes speeds and can be reversed.


    The reason that piston pumps are best suited for hydraulic presses is their ability to perform in high pressure hydraulic

systems. The pump operates at large volumetric levels due to its low fluid leakage. The types of piston pumps include axial,

bent axis, and radial.



    The number of cylinders in a single column hydraulic press varies according to its design. The function of the cylinders is to

generate the compressive force that drives the anvil and die. In a two cylinder design, the diameter of the cylinder that

carries the ram is larger, while the diameter of the second cylinder that carries the plunger is smaller. Cylinders are metal

pipes with two ports for the input and output of hydraulic fluid.


    The cylinders are connected by a pipe containing hydraulic fluid. When the plunger in the small cylinder applies pressure

to the hydraulic fluid through a downward action, the created pressure is applied to the ram. The action in the smaller

cylinder by the downward movement of the plunger is that of a mechanical actuator used to produce unidirectional force by a

unidirectional stroke.


    Hydraulic Press Process

    The mechanical results of the pressure created in the hydraulic system can be seen in the animation below where a plane

slug is placed under the anvil, and pressure created by the cylinders drives the ram that drives the anvil down into the slug

and forces it into the die.


    Types of Hydraulic Presses

    Hydraulic presses play a major role in the fabrication, assembly, and production of components for machinery and parts

for commercial and industrial products. The differences between the types of hydraulic presses are determined by several

factors, which include their frame and the metals used to manufacture them.


    The popular use of hydraulic presses in manufacturing is due to their ability to apply substantial compressive force to

billets to flatten, shape, straighten, stamp, and bend the billets into designs and various forms. The process of hydraulic

presses, with the use of a variety of dies, can be changed and customized to fit a wide range of manufacturing requirements.


    Types of Hydraulic Presses

    H Frame Hydraulic Press

    With an H frame (two column) hydraulic press, the frame, press cylinder, pump, and bolster are in the shape of an

"H." The uses for H frame hydraulic presses machine include work in repair shops, maintenance buildings, and production assembly

lines. They have a hand pump for low volume applications or air and electrical pumps where consistent operation is required.

The amount of available force in an H frame depends on the size of its cylinder.


    C Frame Hydraulic Press

    Single column (C frame) hydraulic presses have a body frame in the shape of the letter "C" with a single arm

structure. They have excellent rigidity, guide performance, speed, and exceptional precision. They are ideal for small

operations and require limited floor space.


    Four Column Hydraulic


    Four column hydraulic presses can apply substantial force to any size work piece. They can have a single or two cylinder

design depending on the requirements of the manufacturing process. Four column presses have a central control system with

semi-automatic cycling and adjustable pressure and compression speed. The punching and working pressure are adjusted in

accordance with the needs of the stroke range.


    Horizontal Hydraulic Press

    There are operations where it is difficult to shape a component or part using a conventional vertical press because the

part is too long or short to load vertically. Those types of workpieces are shaped by a horizontal press where pressure is

applied horizontally.


    With a horizontal press, there are two platens with one being fixed while the other is movable. Pressure is applied

horizontally between the platens. This type of press has a protective mechanism on the hydraulic system to avoid overload,

and it can have different tools attached.


    Hydraulic Wheel Press

    A horizontal wheel hydraulic press is used for mounting and unmounting wheels, bearings, gears, and sheaves onto and off

of shafts, axles, rolls, or armatures. They are used for the correction of shaft parts and pressing of shaft sleeve parts. A

wide range of industries use hydraulic horizontal wheel presses as part of their production process. Examples include the

automotive, motor, electronics, mining, and home appliance industries where precision press mounting is necessary.



Hydraulic Press

    When large, long shafts from oil rigs, cars, trucks, and aircraft need to be straightened, the ideal method is a

hydraulic straightening press that slowly controls the straightening process, resulting in accurate and fully functional

parts. Hydraulic straightening presses can be used to straighten shafts, plates, and large weldments.


    Straightening hydraulic presses for weldments straighten the workpiece prior to it being welded. The process for working

with shafts is a little more difficult since they come in different diameters and lengths.


    Straightening hydraulic presses can have a fixed head or moving gantry. When large diameter shafts are being

straightened, gantry type presses are used where the press moves along the X axis while the main cylinder provides Z axis

downward movement to engage the shaft.


    Uses for Hydraulic Presses

    The hydraulic press is a major part of a variety of manufacturing and production processes. From the shaping and creation

of machine components to crushing and compacting waste and refuse, hydraulic presses are an essential part of modern

industrial operations.


    The use of hydraulic presses is based on the concept of compressive force created by pistons that produce mechanical

force through the use of pressure from an incompressible liquid. The amount of force can range from a few tons for a manual

hydraulic press to thousands of tons for motor driven ones.


    Uses for Hydraulic Presses


    Part production and fabrication are the most common uses for hydraulic presses. The speed at which hydraulic presses can

configure and shape automobile parts from wiper blades to gear housings has made it an essential part of product

manufacturing. The number of industries that depend on hydraulic presses range from steel production and assembly to precise

and complex electronics components.


    Powder Compacting

    A powder compacting press compresses different powdered materials into shapes, designs, and densities by applying an

exact amount of pressure to the material placed in a mold. Any of the various hydraulic presses can be used for the process,

from the two column version to four column version.


    To complete the compacting process, the powder mixture is loaded into a steel die where it is pressurized to the shape

and form of the die. The three stages of the compressing process deform the particles of the powder and significantly

increase its density.


    Scrap Baling

    An image of hydraulic presses that has become popular in entertainment is the scrap baling press that crushes cars,

equipment, and machines. This type of hydraulic press has gained popularity as a method for recycling and repurposing the raw

materials from products that are no longer of use.


    A hydraulic scrap baler is a cold pressing method for compacting various types of metals for convenient storage,

reprocessing, and transport. There are a wide range of scrap balers, with each type designed to crush and compact a

particular type of material.


    Ceramics Production

    The traditional method for shaping and forming ceramics uses a heated kiln at a temperature exceeding 1800° F. The

heated method is slowly being replaced by hydraulic presses that work at room temperature. Using minimum pressure and

significantly less time, hydraulic presses compress ceramic material into shapes and forms such as bathroom tiles, bricks,

and cement.



  Wyślij wiadomość

Related ads

Solar Street Lights vs Traditional Street Lights

Solar street light and other solar products have grown in popularity over the years. Unlike traditional sources of light, solar lights don’t harm the environment. This is the reason why a lot of people are switching to this technology for their lighting…

Acrylic Plastic

Acrylic Plastic     Acrylic plastic refers to a family of synthetic, or man-made, plastic materials containing one or more derivatives of acrylic acid. The most common acrylic plastic is polymethyl methacrylate (PMMA), which is sold under the brand names…

low price Tubular Vials

Tubular clear glass vial Applications Tubular clear glass vial is widely used for mixing different medications and drugs for injection. Such as :vaccacine ,lyophilized product in pharmaceutical industry. Description Hunan runfuture is a professional…

Why Wall Art Matters Most In Interior Design

Why Wall Art Matters Most In Interior Design     Too often in interior paint design, we see wall art treated as an afterthought. It’s what gets dealt with last, long after the final coat of paint has dried on the walls and all of the furniture has been…

Short Review About All Types of Busbar Bending Machines Facilities

At Manual tools operator should bend busbar via hand force and it is suitable just for small size if busbars, it could bend busbars at normal axis and measurement is possible just with operator eyes . repeatability and accuracy depends on operator…

Report this ad